Our Trust 1 Cares Membership Plan
Protecting Your Home & Your Wallet
Ask your technician about our membership options!
What’s Included
- Annual Maintenance: 1 Heating + 1 Cooling Tune-UpHeating only? Get a water heater flush or tankless descale instead.
- Boiler: We clean the burner chambers.
- Furnace: We clean the condensate drain, flame rod, cabinet and burner tubes.
- AC: We inspect the AC coil, outdoor unit visual inspection & rinse.
- 20-Point Checklist: Every maintenance visit includes a 20-point inspection.
- Annual Plumbing Inspection
- Priority Service
- 10% Off All Service
- $0 Diagnostic With Repair
- Never Pay For The Same Repair Twice
- Up To $1,000 Repair Buyback CreditPut past repairs toward a new system.
- $500 Replacement Coupon
- Free Annual Tune-Up For A Friend Or Family Member
- Transferable If You Move
See Terms
- Annual maintenance covers 1 unit; each additional unit is $199.99/yr.
- Excludes oil systems, ductless systems, and commercial properties.
- $0 diagnostic applies when you approve the repair. If you decline, the standard diagnostic fee applies.
- Repair buyback: up to $1,000 of previous repair costs can be applied toward a new system. The credit never expires as long as your membership stays active.
- The buyback credit can’t be combined with the $500 replacement coupon; you get whichever is greater.
- Discounts don’t apply to new system installations.
- Same repair guarantee: if the same part we repaired fails again within 1 year, we fix it at no charge.
- Friend & family tune-up: one per year, 1 unit, for a new Trust 1 customer. Same exclusions apply.
- The membership must be active to use any benefit.
- If the membership is canceled, any discounts and waived diagnostic fees received will be charged back.
- Transfers to your new home within our service area, or to the new homeowner.
Company Wins · Employee Wins · Customer Wins
We Help People Win.
Become a Trust 1 Member Today!
Trust 1 gives you flexible options, so you never have to compromise on comfort, or cost.
Maintenance Plan Form
"*" indicates required fields
*Terms Apply
*Excludes oil systems, ductless systems, and commercial properties.
*Auto-renews each term. Members get a reminder before renewal. You can cancel anytime. If you received discounts or waived fees, those must be repaid if you cancel before the term ends.
Protect Your Home
Essential HVAC & Plumbing Maintenance Tips
YouTube
This content is blocked because YouTube cookies have not been accepted.
Protect Your Investments With Home Care Check-Ups!
COOLING & HEAT PUMP SYSTEM
- Check condenser coil
- Check evaporator coil
- Check blower motor
- Check refrigerant charge
- Lubricate motor, bearings, and fans (if applicable)
- Check and tighten all electrical connections
- Check temperature and pressures
- Check thermostat for proper operation
- Test and label emergency shutoffs
- Check controls and safety devices
- Check capacitors
- Check condensate drain
- Check relays and contactors for proper operation
- Check ductwork for leaks (if applicable)
- Check proper amperage and voltage of A/C system
- Start and test operation and cycle of unit
- Check air flow
- Check humidifier/dehumidifier
HEATING & BOILER SYSTEM
- Check all the burners for proper operation
- Check thermocouple for proper operation
- Check the heat exchanger surface
- Check the flue pipe
- Lubricate pumps, bearings, and fans (if applicable)
- Check the inducer and blower motors
- Check and tighten all electrical connections
- Check the safety switch and controls
- Check the pilot assembly
- Check temperature and pressures
- Check thermostat for proper operation
- Check drain lines and traps for proper function
- Test and label emergency shutoffs
- Check gas valve
- Check zone valves
- Check expansion tank
- Check aquastat, relay and water regulator
- Check air flow across indoor coil and blower wheels
- Check ductwork for leaks (if applicable)
- Start and test operation and cycle of unit
- Check air flow
- Check humidifier/dehumidifier
STEAM HEATING SYSTEM
- Check all the burners for proper operation
- Check the pilot assembly
- Check the heat exchanger surface
- Check the flue pipe & draft
- Combustion test
- Check gas valve
- Check and tighten all electrical connections
- Check the safety switch and controls
- Check boiler water level & sight glass
- Test & clean the low water cutoff (your boiler’s #1 safety)
- Check the pressure control & clean the pigtail
- Check the steam pressure gauge
- Check the automatic water feeder (if applicable)
- Inspect boiler piping & Hartford loop for leaks
- Flush the mud leg (if a draw-off is installed)
- Check main vents
- Spot-check radiator vents
- Check thermostat for proper operation
- Test and label emergency shutoffs
- Start and test operation and cycle of unit
- Show you how to read your sight glass
PLUMBING SYSTEM
- Check water pressure
- Test drinking water
- Check washing machine hoses
- Check all faucets for leaks to ensure proper
operation - Dye test toilets to check for leaks to ensure
proper operation - Check all drains for proper flow
- Provide BioOne treatment to all drains and toilets
- Check garbage disposals for proper operation
- Check all emergency shutoff valves for proper
operation - Label all shutoffs at locations
- Check all under sink traps and shutoffs
- Check main water meter
- Check all outside spigots
- Water heater check off:
• Gas or Electric
• Shut Off Valve
• Flue Piping
• Draft
• Safety Valve
• Wiring
• Gas Shut Off
• Thermostats on 120F