Skip to main content
high efficiency boiler installment

Quincy High-Efficiency Boilers

Quincy High-Efficiency Boilers

Here is a list we came up with to help you save money when running your Quincy High-Efficiency Boilers and reduce your energy costs. To minimize the energy your current boiler absorbs by up to 40 percent, use an effective thermostat and thermostatic radiator valves. We recommend that a qualified specialist installs this. Putting your boiler on a timer to turn off the boiler when the heat is no longer needed, such as when no one is home, is a great way to conserve energy that is going in, saving you money.

If your boiler is over 10 years old consider replacing an older boiler with an effective new one could reduce up to a third of your energy consumption! Switch down your central heat by one degree and you could cut your heating bill by up to 10%. Switch your heater temperature down by one degree, you’re going to save energy and you’re unlikely to notice the difference. Switch the thermostat down. Turning down your thermostat by only 1 degree will reduce your consumption of energy by more than 5 percent. Additionally, while they are unoccupied, do not heat rooms.

Crown Boiler Phantom Series

Quincy High-Efficiency Boilers

Reduce the temperature in hot water. Your thermostat for hot water does not need to be higher than 140 degrees Fahrenheit (60 degrees centigrade). Anything higher and you just mix it with cold water to cool it back down for use. Upgrade heating controls to increase your central heating system’s performance and reduce your costs by up to 20%. We suggest having a qualified professional install this. Service your boiler! They are less likely to break down when boilers are serviced frequently, and it will operate more effectively and safer. Daily boiler maintenance lowers the energy costs and guarantees a longer life for the boiler and its key components. Take a shower, rather than a bath. A regular bath will use up to 3,400 gallons more water per year than a five-minute shower!

Here Are Some Extra Tips – Quincy High-Efficiency Boilers

  • Cleaning is imperative. If it is clean, your boiler will work better. Check the soot too, since too much soot can mean bad combustion. And, while you are at it, check the joints to make sure that no unnecessary air gets in, which also decreases the efficiency of the boiler.
  • Test the grilles for air to make sure that they are not blocked. Make sure they are safe and unobstructed at all times.
  • A boiler that is well connected is a happy boiler. It is always worth ensuring that all the connections are plugged in properly. Check the electrical connection and the pipes for gas and the connections for incoming and outgoing water.
  • Right pressure. The usual operating pressure of your boiler can vary between 1.2 and 1.5 bars. Turn it on, wait a couple of minutes and verify that the parameters are within those. If the pressure is higher, some of the radiators “purge” to reduce the pressure. If the pressure is too low, on the other hand, simply open the tap slightly to allow more water to enter the heating circuit.
  • Get the correct temperature. Crucial to your convenience and wallet. We suggest that you keep your home at an 18°C temperature when you’re going to be out for a couple of hours, and even when you’re asleep. It is essential to keep the house at around 21°C during the hours that you are busy at home. That said, you should know that heating expenditure incr
  • eases by 7 percent for every degree above the ambiance you need. If you dress adequately, it should be perfectly possible to spend a pleasant winter in a house that never goes above 20ºC.
  • Keep an eye on your radiators. To get rid of the air collected inside you can purge them. Using a screwdriver and a receiver to prevent flooding the carpet, and twist the purging valve for all the radiators little by little. You’re going to hear the whistling sound. Close the purge valve when it ends and when you see drops of water come out. This will allow your radiators to heat up uniformly and make more effective use of energy. A trick: if underneath the radiators are colder than above, that means the air is in. You now know what you’ve got to do…
  • Close the main gas service shut-off valve if you are going to be out for some time…
  • If you have any questions or any adjustments you want to make, contact an approved technician.
  • Be attentive to fake gas repair facilities and be cautious. You determine who will check your boiler, and when.
  • Open the doors and windows immediately if you detect the smell of gas: do not use any electrical switches, close the main gas supply shut-off valve and call the emergency gas service.

Approved Boiler Servicing –

The regulation is straightforward and suggests that you should have it serviced at least once every 2 years if you have a boiler at home. Not to confuse boiler operation with the inspection of the gas installation is extremely important: Boiler service is for your boiler only and is compulsory every 2 years (although maintenance insurance plans have an annual service). You are free to choose who services your boiler: you can take out insurance or call an approved technician directly.

The gas installation inspection applies to the gas meter, the piping, taps, rubbers… It is compulsory every 5 years (4 years in the Basque Country) and the inspection is the responsibility of your gas distribution company: they will contact you and let you know that they will visit your house, send a technician and charge you a small additional cost and your bill. Keeping nice and warm is a technical problem: if your boiler is working properly, you’re guaranteed to stay warm. But it is also a financial issue: about 25 percent of your annual energy usage is equal to your heating usage. If you don’t want to get cold or waste electricity, consider servicing your boiler regularly. The formula is simple: Technical Fault = Cold + Expense.

The post Quincy High-Efficiency Boilers appeared first on Welcome to Trust 1 Services.

Leave a Reply

Your email address will not be published. Required fields are marked *