Skip to main content
Installing An Abington Faucet Easy Tips

Installing an Abington Faucet: Easy Tips

Adding a stylish faucet to your kitchen or bathroom can be one of the best ways to give your home a touch of elegance. Luckily, Abington faucets are getting easier to install every day. Installing a new faucet is rarely hard and it can improve the functionality of your kitchen.

Additionally, a new faucet can update your space. Plus buying one in a hardware store turns out to be more affordable than you think. In fact, Abington faucets that install entirely from the top are now available so you don’t have to crawl underneath where it’s definitely uncomfortable.

However, making something easy to install doesn’t necessarily mean you’ll know everything off the bat. There are things that you should consider to make your installation more convenient and leak-free. It’s better to take on a task with some quick knowledge to help you out.

Take Out the Old Abington Faucet

The possibility of having to cut out your old faucet is generally high. That’s because the nuts holding the faucet deteriorate over time making it nearly impossible to loosen. Even with a strong basin wrench, you could barely break loose the corroded nuts.

Abington Faucet Repair Tips

You can try just simply cutting off the nuts instead. This should save time and make removing the old unit easier. To cut them properly, a rotary tool with a metal cutting disc or an oscillating tool with a metal cutting blade should do the job. After that, a screwdriver is used to pry the nut away from the faucet body. These are also essential if you need to cut out any other parts that may cause problems.

Have a Basin Wrench Within Reach

One of the most necessary plumbing tools is the basin wrench as it is indispensable for removing and installing most faucets. It allows you to reach into tight uncomfortable spaces behind the sink to loosen or tighten the nuts that hold the faucet. Additionally, it helps loosen and tighten the nuts that connect to the supply lines which are responsible for any leak or malfunction. You can find a basin wrench at any hardware store.

Mount the Faucet with Silicone

How, and with what you mount your faucet is crucial to the function of your unit. If it’s not mounted with the correct seals, water can get under your faucet, corrode it, or even damage your countertop. Some manufactures include a gasket to create a seal between the faucet and the sink. Nevertheless, you can never go wrong with applying a bead of clear silicone caulk to ensure a good seal. The silicone acts as an adhesive to avoid the faucet from moving around if the nuts loosen.

Upgrade Your Supple Lines – Abington Faucet

It’s important to check your supply lines and if needed, upgrade them. New-Style connectors with braided jackets are virtually foolproof thanks to the gaskets built on each end of the jackets. Unfortunately, new technology costs more than traditional connectors. Despite the higher price tag, these items are worth every dollar. Plus, the new braided connectors are known to be stronger and last longer.

Most people think that it’s necessary to crank the nut very tight for an effective seal. Yet, a finger tight fit with about full turn with a wrench tends to do the job right.

Take Measurements for Supply Line

Determining the length of the supply lines you need is important because it puts the functionality of the line at risk. Even though many new faucets include supply lines, some may not be long enough or they might not be able to connect to your shutoff valves. To prevent these inconveniences, you’ll need to measure from underneath the sink where the faucet connects to the shutoff valve and add a few inches.

It’s important to check if your faucet included supply lines that aren’t long enough. If so, there’s no need to buy new supple lines, extensions work great. To know if the supply line you’re going to buy matches, take your old supply lines to the store to match sizes.

Stuck Shutoff Valves

It could be the case that your shutoff valve is stuck open. This is common since the valves are only closed when something needs fixing or replacing. There’s no need to stress because it can often be freed by loosening the packing nut slightly. This results in relieving pressure on the valve stem, allowing you to turn the valve more easily. Remember at the end to retighten the valve system just enough to avoid leaks.

Remove the Aerator Before Turning on the Water

The aerator is the device on the end of your faucet that has a screen filter or covering on the bottom. It’s common that when tinkering with plumbing, debris that has built up inside the pipe dislodges and is brought back up. This could clog the aerator.

To prevent your new aerator from clogging, remove it before turning the water back on after a plumbing task. Most aerators are removed simply by unscrewing counterclockwise. Other new faucets include a special tool for removing it.

Abington Faucet Repairs

If your new faucet is a pullout, removing the aerator could be difficult. It’s best to just unscrew the entire spray head from the supply tube and point the tube into the sink while running the water. If you experience a slow flow of water, clean the aerator.

Keep Instructions and Parts Near

It’s more convenient to have instruction manuals and tools within reach for future events. New faucets lately include their own tools for removal and installing, and other parts that you should keep. It’s easy to keep track of these by just storing them in a kitchen drawer or in a freezer bag hanged inside the sink cabinet. This way whenever there is a problem or you have to replace your faucet, the things you need will be conveniently available.

Abington Faucet First

If you’re installing a new sink along with your faucet, mounting the faucet before installing the sink could be an optimal idea. It could save you from being underneath the sink lying on your back uncomfortable for longer than needed. You may even find it easier to remove the whole sink when replacing your faucet. Another benefit of removing your sink is that you have an opportunity to clean off old dirt that accumulated around.

Abington Faucet – Check For Leaks

It’s important to always check for leaks when done with faucet installation. While letting the water run, wipe around the joints with tissues, and check for any droplets. With a tissue, even the smallest leak will be caught.

Abington Faucet Installation

Trust1 Services is ready to help you with your Abington plumbing needs. Our expert team of certified plumbers can help you with your Abington Faucet needs. Contact us today and receive a free estimate.

The post Installing an Abington Faucet: Easy Tips appeared first on Welcome to Trust1 Services.

Leave a Reply

Your email address will not be published. Required fields are marked *